An Overview of Pressure Reducing Valve

A huge amount of water is wasted while supplying it to the different places. Thus, we use pressure reducing valve, which is mechanical device used to lower the pressure of liquid or gas. Pressure reducing valves help significantly in lowering the rate of wastage. They have myriads of applications but are mostly used in the field of water supply. Municipalities usually have a big area for water supply. The pressure is at times very high because of which water starts leaking. If one uses pressure reducing valve the leaking i.e. the wastage of water can be reduced. Moreover, people can also adjust the range of PVR which is set at the time of manufacturing

When Pressure Reducing Valve is required?
Many inculcate a pressure reducing valve into their society if the pressure of the water supply is above the optimum pressure level. Alternatively, pressure reducing valves can also be used for water conservation as huge amount of water will be saved when the pressure is regulated. Water loss is not only a problem of particular country but significantly of whole world. Pressure reducing valves will immensely help in conserving the water worldwide.

How to choose the right Pressure Reducing Valve?
Times are gone when the consumers were unaware about the pros and cons of the product. Now customers buy what they want, not what a company is selling. The world has completely changed and the era we are living in is entirely a consumer-driven economy. Most of the things bought by people are first, thoroughly researched upon, after which they go for it. Following are the few points which one should keep in mind while buying a pressure reducing valve:-

• Determine the Measurements:- Measure the parameters of the inlet as well as the outlet pressure. Make sure that you know the maximum and minimum flow rate of the water supply.
• Calculate the correct size of the valve:- Fall off is defined as the difference between the pressures on the valve outlet and the inlet pressure. Analyze the valve capacity chart provided by the manufacturer. Then pick the one with maximum flow rate and after which locate the pressure fall off. Select the valve with right size as over-sized valves will lead to unnecessary noises and even valve failure. Moreover, if you need many valves go for the cheaper ones as then you can use the pipe with small diameter.

Further more make sure that you buy a good quality pressure reducing valves so that they can serve you for long run. Conserve potable water by using these valves and prevent the wastage of water in your day to day life.