five Advantages to Select Superfine Lamination Autogenous Mill

1,In the Superfine Lamination Autogenous Mill, the ore from a height throwing backward, not affected by the buoyancy of the slurry, the lower ore cylinder direct hit, the impact of the strong, large pieces of ore will be crushed ore and produced in-house more cracks or fissures extend cause.

  2, this effect laminated crushing and grinding of astonishing. Because the ore particles themselves have a lot of gaps cracks after a strong impact on the falling ore by strong squeeze from all sides between the particles and particle impact, grinding and so on, give full play to the laminated crushing and grinding grinding effect.

3, when the block and the cylinder with the particulate ore is rotated upward, because pulp is not affected, so a large number of repetitive grinding ore particles between the edges and the surface of the ore, but also to make efficient ultrafine laminated self mill grinding effect is far better than the traditional self-mill.

4, due to the Superfine Lamination Autogenous Mill to the mine and the water is at the side of the mill since, in the lower part of discharge from the other side of the mill, and the water will drain from mine to mine end to end mill good qualified products to accelerate the discharge, which greatly improves the efficiency of discharge of qualified products, does not produce excessive wear.

5, the traditional mills often have low self-filling rate, efficient and ultra-fine lamination from the mill filling rate of about 45%, you can make the same mineral in the body of the period of stay tube mill has greatly enhanced the impact and the number of grinding, so that more processing power.

Production grinding equipment manufacturers everywhere, but Yantai Xinhai company has been adhering to the innovative energy saving ideas, not the best, just as one to meet customer needs most.

Xinhai ball mill believe is your best choice.

More in >> http://www.ballmillassurance.net/products2_2_6.html