How to remove rust of corn cleaning machine

How to remove rust of corn cleaning machine?

Corn cleaning machine may have some rust after a long time of usage. So it is necessary to master some rust removal methods.

First, we can use vinegar for rust removal. As we know that vinegar has good effect of rust removal. After applying the vinegar, then we air it and apply some mineral oil.

Second, we can use baking soda and the washing water for rice, and put the parts into it and blend it. When the rust floats on the water surface, we can clean the parts and dry it. Then we also apply some mineral oil.

From the above introduction, you must have mastered the methods of rust removal. To make the corn cleaning machine keep good working condition, we should remove the rust frequently.

 The materials go into the sieve for big impurities from work bin which is baffled to uniformly scatter the materials on the sieve.The sieve vibrates to separate the big impurities from the materials .The big impurities are discharged from the outlet. Corns,mediate and small impurities fall onto another sieve through holes.

The small and flat corn vibrates with rubber ball to fall onto bottom plate through the holes and goes out from outlet.The other materials are graded according to their different gravities from the air suction system.The grains mixed with stones fall on the destoning sieve along the first,second and third grading devices.The destoning sieve seriously searches out stones and some impurities heavier than the corns and discharges them outside.The lighter impurities are discharged through air suction tunnel due to the reverse wind generated by destoning adjustment plate.The destoned materials flow to the end of sieve and go to the corn peeling machine.
http://www.corn-milling-machine.com/PRODUCTS/Corn-Processing-Single...