The accurate control of the work of the sand making machine

In the manipulation of the sand making machine, if not accurate control, it may arise from the unnecessary accidents, so to ensure that the machinery and equipment can be maintained in good condition, to ensure the safety of production, reduce the occupation safety and health hazards, safety system sand machine operation must not be ignored, following on from our professional staff to tell you how to make sand making machine safety work:
1, check before driving adjustable vortex chamber to observe the door is closed;
2, check the impeller rotation direction, from the inlet direction. The impeller should be clockwise rolling, otherwise should adjust the motor wiring;
3, sand making machine must be no-load start, sand making machine normal operation before feeding, sand making machine and conveying equipment start-up order: row material, sand making machine, feeding, and boot shutdown sequence in reverse order;
4, the feed particles in strict accordance with the rules, no more than into the sand making machine designated materials, to avoid clogging impeller passage and the central feeding tube, feeding to successive average;
5, discharging equipment to stop, should promptly stop feeding;
6, sand making machine during operation, such as severe vibration and abnormal noise, should immediately check;
7, sand making machine, every class, adding grease;
Safety is very important, so in control when used in addition to ensure the safe operation of equipment, but also as far as possible protective measures, more than seven requirements must be followed.