The system of removing rust sand making machine

Because the sand equipment operating environment and so on, that are triggered by the sand making machine rust is a typical reaction, when placed inside the air to get a lengthy time will rust. Simply because the sand making machine components are frequently somewhat harsh environment, so a lot more easily lead to rust and influence the production top quality. So the best way to sustain the sand making machine and gear can accurately operation becomes pretty important.
A, chemical cleaning: would be the use of acid and metal oxide chemical reaction, a approach of removing rust and eliminate the sand making machine metal surface rust, called pickling rust, can only operate within the workshop.
Two, the smaller wind-driven or electric rust: important in electric or compressed air as a driving force, the assembly suitable descaling device, reciprocating or rotary motion, so as to adapt to the specifications of several occasions of rust. Because the angle grinder, wire brush, pneumatic needle rust remover, pneumatic chipping hammer, tooth sort rotary descaling device, which belongs to the semi mechanized equipment, tools, light, flexibility, can completely remove rust, coating, the coating for wool processing, but can not attain the surface processing good quality and the function efficiency is low injection processing. Is often used in any position, in particular broadly utilised in the repairing process.
Three, the high-pressure water abrasive cleaning by higher stress water jet effect (plus the role of abrasive grinding) and prized role of water damage and corrosion coating around the steel adhesion. Its characteristic is no dust pollution, no damage to steel, the progress of rust removal efficiency tremendously, as much as 15m2/h or far more, derusting high-quality. But following rust removal of steel to rust, to become wet having a unique coating rust paint, possess a higher influence on the common function of paint coating.
Four, apply anti oxidation in iron products surface coating paint: mineral oil, paint or baking enamel, spray etc.. Inside the iron and steel surface by electroplating, hot plating method of coating a layer of rust of metal, for example zinc, tin, chromium, nickel etc.. The metal oxide film surface can type a layer of dense, so as to stop iron goods and water, air and also other material contact and rust. May also be utilised to chemically iron solutions surface is usually a layer of dense oxide film and not chaos to stop rusting iron items.