Elements of laminate flooring to buy

Strengthen the floor close to the building a deck box from composite appearance and highly wear-resistant features, is loved and buy many consumers, however, to strengthen the floor of some relevant indicator of consumer still do not understand the Department. 1. Strengthen the floor -8 mm thickness and 12 mm laminate flooring from any difference between the thicknesses of thin and thick, typically 8 mm and 12 mm. From the environmental protection point of view, better than thin thick. Because the thin, relatively less per unit area with plastic. Thick, thin, high density inferior impact resistance almost, but the foot feeling relatively thick natural.

2. The laminate flooring wear rotation around at least 4,000 the number is to strengthen the representation of abrasion resistance of the floor. The number of rotations before once demonized, now the national standard secondary wear index for 4000 and above; wear level is 6,000 rpm and above, which are suitable for home laminate flooring, while more than 9000 or even 10,000 rpm laminate flooring, is part of a commercial grade standards. 3. clarity and color laminate flooring laminate flooring wear layer is also often referred to as related imitation wood flooring, so its surface color clarity is very important. Wear-resistant layer is typically referred to as "wear-resistant paper," is a more transparent substance, at 6,000 rpm or more, need 46 grams wear-resistant paper on the ideas for covering a concrete patio, in order to ensure to meet the requirements. 38 grams of wear-resistant paper wear revolution can reach 4000-5000 rpm. The thicker the wear-resistant paper, and strengthen transparency, the worse the floor surface, so choose a reasonable range of abrasion resistance of the laminate flooring will improve the texture of the surface color clarity.

The water swelling ensure water resistance to strengthen the stability of the floor thickness swelling reflect the product, equal density laminate flooring, thickness swelling the greater dimensional stability worse. National standards, to strengthen the floor thickness swelling does not exceed 10% of qualified, first-class products should be less than equal to 4,5%, superior product should be less than equal to 2,5%. Poor water resistance of laminate flooring in a damp environment, strengthening the floor surrounding if Mifengbuyan, obvious swelling may occur, causing dimensional changes, dimensional changes caused by laminate flooring over the General Assembly bagging, thus affecting the life of laminate flooring.

5. Laminate flooring formaldehyde emission GB and European standard of national standard, not more than 1,5ml / L are in line with national standards, in the purchase of laminate flooring can be obtained from test data. And many companies have begun to follow the European standard, divided into E0, E1, etc. level, E0 formaldehyde emission that is less than the average of 0,5mg / L, E1 standards and GB are equal. In addition, some companies use their own advantages developed such as "anti-aldehyde" "aldehyde hunting" technology, it can be used as a reference to one purchased. Share the article you might be interested in: Easy to pick laminate flooring need to master seven principles taught you at a glance the quality of laminate flooring is good or bad decision to strengthen the two alternative decking panels for boats substrate strengthen quality flooring laminate flooring laminate flooring purchase factor analysis simple to buy Test Method