Bucket elevator operation 1, hoist shall be under no load startup, after being properly functioning, contributions to hoist feed, feed should be uniform.So as not to stand by material blocking, in case of congestion, must immediately stop feeding, pull open board, remove blockage in base material (are strictly prohibited to chop material hand in frame), to feed again after hopper with normal operation. 2, parking before, should first stop feeding, after waiting for material basic unstow to stop.3, hopper, belt running deviation or skid can adjust the adjustment screw on the stand.
Adjust the bucket conveyor is as follows: A. after operation, appropriate adjustment base on manual screw the bottom wheel downward movement, with adjustable tightness of winnowing pan belt.Belt will lengthen, after long time operation after long strap should timely adjust;B. mobile motor to adjust the drive chain tensioner degrees;C. try adjusting the tilting plate distance from the edge of the winnowing pan, in case of return of grain;D. adjust the feeding hopper door can change the feed rate, ensure the winnowing pan has a certain rate, thus improve the productivity.
The maintenance of bucket elevator is in the following: 1. Each class shall inspect the technical status of the machine before operation.2. In the process of operation, bearing, chain lubrication on a regular basis.3. After the operation, chain, bearing slogans must lubrication and maintenance, to prevent rust.4. Check the winnowing pan, if there is any breakage or crack, it should be replaced in a timely manner.5. When the end of the season or change their crop varieties, should clean up the machine, open the door of the stand cleaning, sort out the remaining material, and then start the machine 5-10 minutes after downtime, will clean up after cleaning door plug in. Six, bucket elevator maintenance and maintenanceTo prolong the service life of equipment, ensure the normal operation, dealing with fasteners hopper, etc on a regular basis for inspection, found that the wear or deformation mechanism and shall repair or replace immediately, and keep the bearing has good lubrication.
bucket hoist conveyor: http://www.hxjq-ballmill.com/pro/bucket_hoist_conveyor.html
Welcome to
iPeace.us
© 2024 Created by David Califa. Managed by Eyal Raviv. Powered by
You need to be a member of iPeace.us to add comments!
Join iPeace.us