How Cheap Sale Kobe Shoe to start Shampoo Industry

How to start Shampoo Industry

Shampoos are used to wash and clean hair. During old days, very rough soaps and other materials were used to wash hair. The rough type of soaps contained major proportion of caustic soda among their constituents. No doubt these soaps had good cleaning power due to caustic content in the shape of saponified materials yet they spoil the human skin by their drastic action. This actually produced irritation and in some it ended in the production of some skin diseases like irritation, skin itching and also in some cases gave rise to demodectic scabies Nike Kobe 10 For Sale.

Shampoos are used to wash and clean hair. During old days, very rough soaps and other materials were used to wash hair. The rough type of soaps contained major proportion of caustic soda among their constituents. No doubt these soaps had good cleaning power due to caustic content in the shape of saponified materials yet they spoil the human skin by their drastic action. This actually produced irritation and in some it ended in the production of some skin diseases like irritation, skin itching and also in some cases gave rise to demodectic scabies.

With the introduction of shampoos all the above diseases and problems was removed as they replaced the soaps at a very high speed. These shampoos are available as solid, paste or liquid varieties Buy Kobe 9 Online.

The demand for shampoos especially the liquid type has never been greater than it is today. For several reasons these have superseded the ordinary shampoo powders owing to the abundance of soft lather produced and it is possible that the use of liquid shampoos does not entail so much trouble. Liquid shampoos are virtually solutions of soft soap in water with just sufficient spirit to aid through saponification. At one time more spirit was used to prevent a slight gelatnation. The popular demand in bulk shampoos being for those with a high viscosity, this can be obtained by leaving the shampoo exposed to air for a week, or a fortnight liquid variety but the demand for coconut preparation is probably not so great as it was. The reasons are the difficulty in covering the odour of the oil and the fact that some coconut shampoos have the hair in a slightly greasy condition.

The number of types of shampoos are available like coconut, which are described below:-

In this process, caustic potash and soda is dissolved in 1/10 of total water requirement and the natural heat generated during the combination is sufficient.

Now, the coconut oil as per formula is melted. The exact calculated amount of lye and oil should be mixed together.

The melted coconut oil is poured in a thin stream in the lye with cntinuous stirring. In the last, when saponification is completed, the solution of spirit and perfume etc. is mixed. This solution is prepared separately. The stirring is continued until the liquid become a light amber colour.

The whole mass is now allowed to stand overnight and the remaining water is added. The shampoo is ready but before filteration and packing it is kept aside for a fortnight.

In this process, heating is required and the coconut oil is melted in a steam jacketed pan at a temperature of about 120oF. The alkali is dissolved in 1/5th of total water requirement separately and added in the hot coconut oil. The addition of lye should be done slowly and the temperature be maintained between 120 to 130oF. The stirring is done for a short time for emulsification of whole mass and then the spirit is added and the temperature is gradually raised to 180oF. This temperature is maintained till the saponification is Ompleted. The soap is allowed to cool and stand overnight.

Now the remaining water is heated to boiling and the soap as prepared, above is added and the stirring is continued till fully dissolved. A little quantity from 3 to 4 Oz. of potassium carbonate may be added in this shampoo if a much clear solution is desired. The prepared shampoo is now kept aside for 8-10 days and then filtered and packed in bottles Cheap Sale Kobe Shoe.

In both the above processes, the cold process, although being much better and yield good quality. The investment on machineries is comparatively less than hot process.