How energy saving crusher to achieve safe production and improve efficiency of production

new technology brings new momentum and impetus to create a better value, innovation is the development of an industry, it is necessary technical efforts. How ball mill for increasing the safe production efficient production?



First, the quality of the installation of the ball mill energy saving, a ball mill is the key to ensure the normal working. And the same types of sequence assembly process energy ball mill. To ensure the proper functioning and ball mill can reduce the damage to the building, it must be installed in the concrete foundation for 2.5 to 3 times the weight. Should have a solid foundation in the ground, and with a minimum distance of herbal 40 to 50 mm.
 When


mill energy saving installation, you must first install the main bearings. In order not to aggravate the shoulder with a newspaper wear pads hollow bearing, the two main difference in elevation of the plate supappliion of vibrating screens port base in per meter length should not more than 0.25 mm. Second, the installation of the unit ball roll mill energy saving can be preassembled mounted directly across the English department, can be divided in several parts of the plant and setting should be checked with the center line of the journal and the ball, which must ensure that each concentric error must be less than 0.25 mm in a meter in length. parts of the final installation Transmission Division (pinion, uranium, coupling, reducer, motor, etc.).


installation of energy saving ball mill
, technical standards should be measured and adjusted. Check the crown mesh poor performance radial swing and pinion; concentric gear and the pinion and the concentricity of the motor and gearbox. When all facilities meet the requirements before they can be finally poured foundation bolts and main bearing backplane. To make the operation of the ball mill high energy grinding effect, must strictly comply with the operating procedures and maintenance. Before starting the crusher, you should check if the bolts tight; gears solid tight situation fittings, etc. keys as well as the head of the spoon mine.



saving ball mill during operation, should always pay attention to the bearing temperature must not exceed 50 ~ 65 ° C. Should always pay attention to the motor voltage, current, temperature, noise, etc.. Pay attention to the lubrication system, oil tank should not exceed 35 ~ 40 ° c, the casing pressure should be maintained at 1.5 to 2.0 kg / cm 2. Verify the size of gear lubrication bearings, gears3r2615 and other transmission parts grader and watch the ball around coverage, simplified reservoir Pai mine tank overflow and return grader sand trap and sand drain is clogged. Always pay attention to the changing nature of the ore, and take appropriate and timely action in the circumstances.



verify mill speed economy oil energy and the adequacy of the lubrication system and tank assembly if the problems of instrumentation, piping is smooth. Around whether the energy saving ball mill and classifier hinder the functioning of debris and then transferred by crane mill one week load loose ball and barrel ore and check ring engaged with the pinion, with or without noise. To start is to first start saving oil pump ball mill when the oil pressure reaches 1.5 to 2.0 kg / cm 2, the ball was cleared to start, then start the machine ranking. And if everything works correctly, you can begin to mine. When

stop recording ball mill, first stop distributor, after processing ore to be simplified, and then stop the engine of the ball mill, and finally stopped the pump. Ranked device screw machine for lifting the sand surface, and then stop the spiral classifier.



Therefore, a process of grinding ball mill follow the steps above to install energy-saving crusher, crusher repair and maintenance in order to achieve safe production purposes to improve efficiency production. Shanghai Zenith Manufacture of slag mill machine, ball mill lime, aluminum powder mill, ball mill, and other series of mill technology for energy efficiency has been greatly improved.