How to Give Your Vibrating Feeder a Longer Lifetime?

Although vibrating feeder has stable vibration, reliable working and long service life. The exciting force can be adjusted to change and control the material flow and the adjustment is convenient and stable. The vibration motor is the vibration source, so that the noise is low, electricity consumption is small and the adjusting performance is good without material clashing. You still need to maintain your vibrating grizzly feeder.

Installation and debugging of mechanical feeder: 1. The vibrating feeder is used in quantitative feed ingredients, to ensure that when feeding uniform stability, prevent the complete materials should be installed, such as general continuous feeding material, can install downdip 10 °.For larger viscous material and water content of the material can be installed downdip 15 °. 2. After the installation of feeder should swim with 20 mm of clearance transverse level, suspension device adopts flexible connection. 3. Empty before test, should tighten all bolts, anchor bolt of vibration motor, in particular, continuous operation shall be retightened 3 to 5 hours. 4. The test run two vibrating motors must reverse rotation, the stability of the current and noise, find parking exceptions should be timely treatment. 5. Refill once every 2 month of motor bearing grease, high temperature season should be filling lubricating oil once a month.

Maintenance requirements of Fote vibratory feeder are as follows:

1. The feeder in the process of operation should be regularly check the amplitude and vibration of the motor current and motor surface temperature, uniform requirements before and after the amplitude, not about place shake, vibration motor current is stable, if discovery is unusual, should immediately stop processing.

2. The vibration motor bearing lubrication is the key to the normal work of the whole feeding machine, in use process should be conducted on a regular basis bearing filling second-rate molybdenum 2 # grease, refill once every two months, the high temperature season filling every month, once every six months repairing and motor, change the internal bearing.

In addition, we are professional jaw crusher supplier, cone crusher manufacture and ball mill suppliers, and stone crusher for sale, etc,. If you have any other question or have an interest on our product ,you can write to us: info@sinoftm.com.

shale ceramsite production machine: http://www.chinaftm.com/news/n596.html