Installation and use of hydraulic cone crusher

Hydraulic Quarry Crusher both for crushing ore can also be used in broken or ultra-crushing, crushing effect is very good, showing a remarkable crushing performance, installation and use of cone crusher is very simple, here we introduce you to Hydraulic Cone Crusher is simple to install and use knowledge.

Use cone crusher

Feed particle size ratio should be appropriate: too thick and too small will affect the hydraulic Quarry Crusher liner life. In the crushing cavity feed to distribution: feeding partial hydraulic cone crusher adjustment ring beating serious, serious wear seat rack, easy to weld cracking, long-term feeding partial move cone will cause damage to copper sleeve. Hydraulic Cone Crusher discharge zone unobstructed: discharge is not smooth maneuvering cone crusher will be lifted, it may cause a serious accident. Adjusting the discharge spout: nesting size hydraulic cone crusher is to rely on hydraulic pressure control, discharge port is controlled within a certain range to guarantee the size requirements. Hydraulic cone crusher crushing idea is laminated broken, that after reaching the crusher feed crowded conditions, ore crushing chamber is filled, by squeezing between the ore and ore crushing, so to use hydraulic adjustment nesting population and size. Strict daily inspection, weekly inspection, the inspection in accordance with the requirements of hydraulic cone crusher specification. With the gradual improvement of the national environmental policy, cone crusher dust occurring during to take timely measures to deal with, so the dust is one of the elements used in the crusher, dust control measures are as follows: Dust zone crusher steel base between the cement foundation and to the hopper and crusher. Measures need to be taken in the dust at the dust in the surrounding block is stuffed with damping 50mm thickness sponge, it can be sealed to prevent dust overflow.

Installation of hydraulic hydraulic cone crusher

Before you start. Be familiar with the instructions before installing, good training equipment technology, maintenance and operating personnel, working principle and structure of the crusher have a certain understanding. For disassembly of parts, components have a general understanding. Before installing the basis for determining the carrying capacity, size proofread basis. Before installing the operating personnel to deal with the knowledge and training equipment for the construction, equipment operation.

Installation and commissioning

Demolition, pay attention to the weight of the hydraulic cone crusher when installed in accordance with the lifting requirements. As far as possible before the commissioning of hydraulic cone crusher empty load test work, which can reduce installation downtime. To ensure that the hydraulic cone crusher feeding center: the installation process to adjust the feed tube with the hydraulic cone crusher cone maneuver vertically, you can ensure that the material evenly distributed in the feed cone inside, try to avoid fines, coarse material segregation, so to ensure the dynamic cone and fixed cone liner liner wear uniform. Hydraulic cone crusher feed separator must be installed on the belt, otherwise it will cause too often iron, hydraulic cone crusher adjustment ring Frequent movement, the seat cushion frame damage.