Structure of spiral classifier spiral classifier feed manufacturers and classification

machinery and equipment classification spiral classifier is one of the most widely used, mainly for the washing process metal ores, suspension of mineral particles were classified according to particle size can also be used to wash the mining sludge dehydration. Classifier spiral is commonly used in the grinding apparatus of the classification cycle, and the construction of the classification is as a spiral classifier. Spiral classifier built



semicircular forming a spiral classifier was the sink end of the spiral blade, the upper and lower ends of the support bearings of the screw shaft, helical gears and agencies upgrading axis.

the hollow in the side of the entrance to the suspension vessel, during the flow in the trougsprl pertambangan bosh overflow weaker mineral particles began to settle classification, because of small fine particles settling velocity in suspension with water to be discharged through the spillway overflow become overflow, while coarse particles settling speed large sink thoroughly after being transported to the rotating screw blade hollow altitude became sand back and returned to the grinding surface grinding.

spiral blade spiral classifier with radial rays and the hollow coupling shaft, placed in the upper and lower ends of the support shaft, and driven by the drive unit at low speed rotation of the upper chute . In the lower part of the pertambanganlifter lower bearing mounted, through the lifting mechanism can raise and lower, so that when it is brought down to the coil, so that grain is removed, so that the shoe will not overload. At the same time, improve the movement of the body can also adjust the pitch of the blades and the bottom of the spiral, so as to adjust the amount of sand back. Category

spiral classifier

classifier spiral helix and the location on the level of the suspension in the container surface is different, can be divided in the damper spiral classifier, high barrier, and the low threshold of three.

spiral classifier based on the number of different spiral, spiral classifier can be divided into single spiral classifier or double. The performance of the classification of the two, but a processing power double spiral classifier suitable for use with a large milling machine is used in conjunction. Manufacturers

spiral classifier, spiral classifier technology, the manufacturer of the machine equipment Shanghai Zenith Machinery ranking. or Lv



West Chicago Machine Official Website