Tube cutting laser cutting machine introduction

cutting tube cutting laser machine to the introduction

a long length of metal pipe running full automatic laser cutting of

long length of metal pipe for the entire Automatic travel cutting laser cutting process requirements, a unique dual pneumatic drive mandrel rotating mechanism (drive shaft W, W1 of the pipe shaft) of the mechanical structure, the air chuck mechanism of the rotation axis W of the left drive shaft is fixed, the gripping of the pipe by means of the machine X, Y, W for the cutting movement of the pipe, the right W1 pneumatic rotation mechanism of the mandrel side output shaft may vary depending on the axial displacement of the work table along the length of the metal pipe can reach a full stroke large Laser cutting machine.

2,

CNC cutting technology is the pipes of large quantities of CNC cutting high efficiency, high quality reduced production, the core is CNC cutting systems CNC cutting. Currently in the process of laser cutting quality problems such as tube parts-break point ahead of combustion, burned corner pieces, cut the slope of the surface, and can be closed circle or deformation cutting of circular shapes, etc., leads directly to a drain pipe and severe production inefficient cutting.

Technology CNC cutting system is the cutting control software index controller for providing advanced cutting technology and rich experience in cutting, cutting workers by the skillful use of system control to achieve high quality, high efficiency CNC cutting.

3

Professiaggregate crusher plant uaeonal technical lifting tube

cutting CNC laser tube because of high cutting efficiency, the efficiency of programming complex nesting if misused, it will cause drains and low cut. With the cutting of tubes professional nesting software on the computer prior drawing, nesting, cutting segmented programming, generate NC program cutting and a long length of metal tube full automatic laser cutting stock race. Software professional pipe nesting is to achieve high volume CNC cutting machine, high efficiency tubes, cutting production base of high quality and conditions.

4,

pipe cutting process because of the cut tubes (especially for small diameter square tubes), the dairy attached to the tube wall, cutting most the generated heat absorbed by the room, the density is cut off, often caused by overheating pipes, nooks and corners of square tube burned, severely affecting the quality of the cut can not even cut. These problems can be

(1) for detecting the height of the laser cutting system tape servo head can ensure the cutting process, the cutting nozzle and the workpiece in order to maintain constant the height of the surface (development not change)screening machine, so that the effect does not vary with the cut surface of the workpiece affected;

(2) to increase method of the oxygen pressure (6-8Mpa)

(3) by synthesis software strong increase in speed.