Rotating device of rod grinder is made up of bearings, elastic shaft device, composed of a gear reducer drive system, the elastic connecting shaft torque is both, and have the effect of shock absorption and adaptation by manufacturing installation error, the actual running smoothly.It must be pointed out that the layout of the mill drive, not allowed to casually change. But do you know whrn you need to stop rod grinding mill urgently?
The features of rod mill are that in the ore grinding process, the grinding media contact with the ore in a linear manner, so that it has selective grinding function. The granularity of the final products is even, and the amount of the particles that are over crushed and ground is low. When used for coarse grinding, the processing amount of rod mill is higher than that of the ball mill with the same specification.
As soon as in the following situatin, should you stop MBS0918 rod grinding mill. Ther are: 1. Due to the effect of the outside world, the workshop production system or the emergency stop section production system, central control room at this time should be according to the workshop, the instruction, it is forbidden to boot device. 2. When there is one of the following fault rod mill, the central control room shall be emergency stop and immediately to report:(1) the main bearing amplitude greater than 0.1 mm(2) the main bearing temperature more than 60 oC and can't make it down.(3) plate, manhole cover, such as rotary body bolts loosening and fracture. (4) mill fall off and break. (5) low lube oil lubricating oil station pressure, temperature, flow rate reach toO (pressure no greater than 0.5 Mpa, the temperature is not less than 50 oC, the traffic is not more than 100 l/min). (6) synchronous motor current fluctuation is bigger, bearing temperature more than 75 oC.(7) fixed bolt looseness fault or the big gear.
Of course, maybe my summary is not comprehensive. And we also have other mining machines, such as China mobile crushers, ball mill manufacturer, screw washing machine and so on. If you have any other question or have an interest on our product ,you can write to us: info@sinoftm.com.
ball mill manufacturers: http://www.fte-china.com/pro/ball_mill.html
Welcome to
iPeace.us
© 2024 Created by David Califa. Managed by Eyal Raviv. Powered by
You need to be a member of iPeace.us to add comments!
Join iPeace.us