Which Part Can Protect Main Motor of Rod Grinder?

Cylinder is a major part of the mill, from each end of the hollow shaft, in and out of the liner and the cylinder, etc.Inside the barrel is equipped with wear-resistant liner, etc. Between steel plate and cylinder end cover is equipped with the acid and alkali resistant rubber MATS, in order to reduce noise and vibration.Lining board has gasket bolts, which can effectively prevent leakage.In the hollow shaft front-rear bushing in order to protect the hollow shaft.Between the bushing and the hollow shaft filling heat insulation material. But do you know which part can protect the main motor of rod grinding mill?

Each main bearing is equipped with two transverse thermal resistance, measuring the temperature of the bearing. Through the electrical signal in low voltage electric control on display. Main bearing bushing alarm temperature set at 60 ℃ and interlocked with main motor, also can be adjusted according to the site usage, stop tripping when 65 ℃. Main bearing long-term work, bearing wear, the hollow shaft sinking, sealing bracket can be adjusted downward, and the hollow shaft good contact to ensure that the seals.

Slow drive part of Fote machinery rod grinder is used for grinding machine maintenance and replacement strap. Down more than 4 hours, start the main motor car in slow drive tray before, in order to achieve the purpose of the loose material. Start the slow driver, he has to start the high pressure lubricating oil pump, prevent scratch pad. Electric protection to realize the interlocked with main motor.

Of course, maybe my summary is not comprehensive. And we also have other mining machines, such as China mobile crushers, ball mill manufacturer, screw washing machine and so on. If you have any other question or have an interest on our product ,you can write to us: info@sinoftm.com.

rod mill: http://www.fte-china.com/pro/mbs_rod_mill.html