2JZ implants, FR layout Mitsubishi LanEvo (CT9A)

Walking brake
Since the suspension of the said, let the suspension movement speed, in addition to the fact there are other ways to reduce the shock absorbers under the weight of the suspension, such as replacing a set of lightweight wheels. Of course, replace the role of lightweight wheels in addition to reducing the weight hanging down, there is more important is lower inert lightweight wheels, silvia Coilovers which allows the vehicle at the time of the drift loss less power will be able to drive wheels . As for the tires, I believe many people would think that drift car tires could choose, because they have never been to racing, but also to let the rear wheels lose their adhesion, allowed to have too much adhesion even worse. If you think so, it shows that you really understand too little drift. First, to show that the drift is not to completely lose the rear grip, but to make the tire completely lost in the critical rear idling when in fact there are still grip exist, otherwise the vehicle is easy to Spin. If we played the drift R / C model can do a simple experiment using a very smooth hard rear tire, while the front wheels are used are more tire grip, which is when the applied force, although R / C four-wheel drive model, the vehicle will be kept Spin, it is because there is no rear grip due. In addition, we can also try to spend a four-wheel all the hard tire and ordinary stone floor, to impose power, then we can also find very difficult to control the vehicle. In fact, the real drift car, too, a real car, the front wheel grip is necessary because the front wheels are used to guide the use, and the rear wheels are slipping, but although it is not completely lost, it is necessary to replace a suitable tires. This Evo 9, its owners a choice produced by Rays TE37 wheels, with the front of, Federal 595 RS-R tires; while the rear is a good selection of corresponding drift through specially developed tires Compete Drift 1 .

Braking systems, this Evo brake retains the original product, S13 Coilovers the owner did not make changes to terms. However, I believe that even if this car does not change, it is enough to use, because unlike drift car racing venues that require intense braking. Drift car brake is used to change the focus shifted completely and the process of adjustment in the drift dynamic vehicle body (pull handbrake greater the angle, when the speed is too high, tap the brake to stabilize the body angle is too large), so drift cars actually do not need such a strong brake system.