New Wood: Remove mill glaze with sandpaper

New Wood: Remove mill glaze with sandpaper or use BEHR® No. 63 to open the pores of the wood and follow all label instructions. For severe stains caused by mold, mildew, algae and fungus, apply BEHR® No. 62 Premium Mildew Natural And Cheapest Replacement Marine Floorand Stain Remover and follow all label instructions. Set nails and fill holes, scratches, and gouges with the appropriate wood filler and let dry completely. Remove all dust with a wiping cloth. Fill all gaps with a 100% acrylic, siliconized, paintable caulking and allow to dry completely.

Patched and filled surfaces should be sanded smooth and dusted clean prior to coating. Previously Painted Wood: Remove all loose and peelingpaintandallother foreign substances.Clean anydirt and grease by scrubbing the surface with a detergent and water solution, followed by a thorough rinsing with clean water. Set nails and fill holes, scratches, and gouges with the appropriate wood filler and let dry completely prior to coating. Remove all dust with Waterproof Bathroom Wall Boards for indoora wiping cloth. Fill all gaps with a 100% acrylic, siliconized, paintable caulking, and allow to completely dry prior to coating. Glossy Surfaces: For maximum adhesion, sand the surface thoroughly before coating.

Weathered Wood Surfaces: † To remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood decks, siding, fences, shakes and shingles, use BEHR® No. 64 Premium Stain & Finish Stripper All About Wood Plastic Composite for Roof gardenand follow all label instructions. Use BEHR® No. 63 Premium 2-in-1 Wood Prep and follow all label instructions to clean and brighten the wood surface and to remove light to medium stains caused by mold, mildew, algae and fungus. Be sure to follow all label instructions.