Wood controversy wear

Now most flooring manufacturers in announcing its wearable data, the majority of published figures are up to 1000 rpm or more (of course, said different agencies to detect the number of revolutions is not necessarily the same, there are some say is 5000 rpm or more .) and these vendors propaganda for revolution when the majority of wood flooring used is 500 rpm. I think that any test should be scientific, any comparison should be objective, not one size fits all.plastic wood colors

First, compare the number of revolutions should use a similar product durability. Or, should choose or both sides of the strongest to the weakest ratio. When a student, I was often soaked in wood shop, when I found a piece of wood is quite good, it was decided to make a pair of nunchakus used inside the warehouse, and later when a Young playing up, put it Yigun sticks made ??of stainless steel flat up. I would like to turn an idea, maybe I was able to accept, because the surface of the flooring is indeed an objective comparison than solid wood flooring wear.cheap pressure treated decking boards

Second is to understand the problem wearable. If only the surface of the wear problem, I think there will be a small problem, some laminate flooring wear, it was only 0.8% per annum (0.8 mm), and the thickness is 18 mm solid wood flooring, laminate flooring is full 14 times. So we are worn together, I do not know who would like to finally lose it.pricing for compositive decking

Another problem is the problem of edge to fracture, laminate flooring although the surface is quite resistant, but its edges are its most vulnerable part, laminate flooring long-term use, the first damage is here. Therefore, this abrasion is conditional, as we hear of Qigong "cocoon", the secret is to cut France knifed down, cut down if it is positive, is not the slightest injury, but if the knife in after chopping down while dragging, then the people who suffer quasi cut is bloody.restaurant wood deck qi zhen