WPC composite decking

Selection of raw materials are usually divided into three types of hollow, solid and structured according to the application, the wood panels. Hollow can be used in smaller trestle surface load above the normal physical and fence wood panels used in heavier load facility above. Production of wood panels using wood also has some limitations, such as the problem of processing temperature and water content, etc.Exterior deck flooring

However, other substrates, such as mineral materials compared to the lower wear plate processing and handling equipment. And compared to traditional wood products, wood panels there are many advantages can be arbitrarily painted water and strong and durable, not easily bent, broken and broken wood panels made from recycled material itself can still be recovered, are environmentally friendly materials and wood products with the same processing capacity maintenance workload is low. The disadvantage is that, compared with other materials, high cost of production of finished wood plank heavier than about twice the density of wood panels is 0.95-1.46, and wood density is 0.35-0.59; determines the content of the wood wood board decay extent that the more content of wood, the higher the degree of corrosion and easy.WPC composite decking

And the production of pure wood products compared to its shortcomings reflect times higher than when not using ultraviolet irradiation timber structure will reduce the life of the energy consumption in the following aspects. In order to ensure compliance with the use of standard wood boards and user requirements, the selection and preparation of raw materials has become very important. It is noteworthy that the material is not particularly specified as the wood board must be materials. Selection of raw materials must be determined in accordance with market demand availability, economic factors and products. Polymers such as wood board may be a high, low density polyethylene or polypropylene, the wood may be different kinds of wood flour or wood fibers. Wood and plastics but the stability is very important, such as cleanliness, physical properties and moisture content. Technical problems encountered in the production of wood panels using clean raw materials and waste materials will be different, because the performance by the great types of raw materials, waste handling and recency affected.[url="http://www.woodandplasticcomposite.com/solutions/Composite-decking-price.html"]Composite decking price[/url]